Time Control - GT1-X TIMERS
 
   
   
   
   
 
 
 
  Special Features
 
Only timer with Screw less vibration proof terminals (Also ideal to use for Specialized applications).
Wireless interiors makes it highly rugged & error proof.
Uses Digital IC's to give accurate repeat cycles.
 
Professional design (terminals at the rear end) makes it ideal to use as a flush mounting timer with MCB type fitting as well as on any standard mounting channel.
  Calibrated dial with 5% Accuracy
  Only Adjustable Cyclic Time with User Selectable ON & OFF Sequence.
  Technical Data
Output contacts
:
 2 change over contacts. (2 separate contact in case of GT1-SD and GT1-ID)
Switching Duty
:
 6A Resistive at 240V AC or 24V DC.
Electrical Life : 10^5 Operations at switching duty.
Operating Voltage : 110V / 230 / 415 AC or 12 / 24 DC
Permissible Voltage : 25% Max
Power Consumption : 10VA (max.).
Reset Time : 100 m. sec. max.
Repeat Accuracy : 0.5% Full Scale
Setting Accuracy : 5% of Full Scale.
LED Indications : a) Power on
b) Relay on
c) Relay off (for adj. cyclic Timer only).
Mounting : Any standard mounting channel.
Dimensions : 40mm(W) * 90mm(H) * 110mm(D)
  Operation
GT1 - ON (On Delay timer) When operating voltage is applied to terminals, the timing is initiated and relay shall energises at the end of timing set on dial. To reset, switch-off the supply.(fig-1)

GT1 - IN (Interval timer) On applying the operating voltage to supply terminals the relay is energised instantly and de-energises at the end of timing set on dial.(fig-1)
GT1 - EC (Equal Cyclic timer) On applying the operating voltage to supply terminals the relay energises and de-energises at the same intervals as timing set on dial.(fig-3)

GT1 - AC (Adjustable Cyclic timer) On applying the operating voltage to supply terminals the relay energises after the 'OFF TIME' set on the dial and remains energised until the 'ON TIME' set on the dial. The sequence goes on till the supply is available on terminals. 'ON' and 'OFF' time can be set individually.(fig-4)
GT1 - ACM (Adjustable Cyclic Multi Range timer) This is an adjustable Cyclic Timer with Multi Time Range. The sequence of ON and OFF is user selectable viz. relay ON first or OFF First.(fig-5)

GT1 - ID (Instantaneous Delayed timer) On applying power supply RL1 (Inst.) will energise Instantly and RL2 (delayed) will energise after the Time Delay SET on dial.(fig-6)

GT1 - SD (Star-Delta timer) On applying operating voltage of supply terminals. The star relay energises instantly. After the completion of time delay on dial the star relay de-energises and Delta relay energises after fixed pause (60ms 10ms) time. It ensures smooth change over. The time range is 30sec./60sec. (fig-7)

Note:- Design and specifications may change due to our continuous developmental efforts.

   
Home|About Us|Products|Contact
All Rights Reserved 2005 Design by Pro-tech Engineering & Controls Pvt Ltd