<< Back to Product List
Printable Format
Time Control - G48-X TIMERS
		Special Features
		Only Analog Timer with Percentage Time Elapsed Indicator (PTEI)
		Wireless interiors makes it highly rugged & error proof.
		Universal Power Supply
		Only Adjustable Reverse/Forward Timer with RUN and JOG Mode
		Available with screw type terminals as well as plug-in types
		Calibrated dial with 5% Accuracy
		Only Adjustable Cyclic Timer with PTEI and User Selectable ON and OFF Sequence

	Technical Data
	Output contacts	:	2 c/o contacts.(2 separate contact in case of GT1-SD & GT1-ID)
	Switching Duty	:	6A Resistive at 240V AC or 24V DC.
	Electrical Life	:	10^5 Operations at switching duty.
	Operating Voltage	:	110V/230V/415V AC or 12V/24V DC
	Permissible Voltage	:	25% max.
	Power Consumption	:	10VA (max.).
	Reset Time	:	100ms
	Repeat Accuracy	:	0.5% Full Scale
	Setting Accuracy	:	5% of Full Scale.
	LED Indications	:	a) Power on b) Relay on c) Percentage Time Elapsed Indication
	Mounting	:	Flush as well as Plug in
	Dimensions	:	48mm(W) * 48mm(H) * 100mm(D)
	Operation
	G48 - M (Multi Range) This is a Multi range timer with Percentage Time Elapsed Indicator. The timer has wide time range from 0.1 second to 30 Hrs. with ON and INTERVAL modes of operations. The timers are available in two types i.e. G48-MU (Universal Power Supply) and G48-M (Specified Power Supply).
	G48 - Q (Quad Range) This is a Quad (Four) range timer with Percentage Time Elapsed Indicator. The timer has time range from 0.3 sec to 60 sec. The timer are available in two types i.e. G48-QU (universal Power Supply) and G48-Q (Spcified Power Supply) with ON and INTERVAL modes of operations.
	G48 - ACM/TE (Adjustable Cyclic Multi range Timer with Percentage Time Elapsed Indicator) This is an Adjustable Cyclic Timer with Multi Time Range available with or without Universal supply, with Percentage Time Elapsed Indicator. the sequence of ON and OFF is also user selectable viz. Relay ON first and Relay OFF first
	G48 - ARF (Adjustable Reverse Forward timer) This is only Adjustable Reverse/Forward timer with RUN and JOG modes of operation and Multi range time settings. On applying operating voltage at supply terminals, the pause time starts and timer remains in pause delay (no relay is ON during this time) till the pause time set on Dial. After pause delay, the forward relay energises and remains ON for the Forward/Reverse Time set on the dial. After forward delay again pause time starts and then Reverse relay energises for the time delay same as forward (Forward/Reverse Time). This cycle goes on with same pause time and Forward/Reverse time continuously. the two relays are interlocked in such a way that both the relays can not be energised at the same time. The timer also has JOG mode, which is useful for manual Reverse and Forward operation. The Push button for Reverse and Forward Operations are provided in the front of the timer.

Note:- Design and specifications may change due to our continuous developmental efforts.